Main page » RX-8 SE » Ignition » NGK IGNITION COIL MAZDA RX-8

NGK IGNITION COIL MAZDA RX-8

Mobile Preview: NGK IGNITION COIL MAZDA RX-8

Description

Description

Scope of delivery: 1 NGK ignition coil fits Mazda RX-8 all types and years.

Technical information: Ignition coil: Number of inputs / outputs: 1, Number of poles: 3, Ignition coil: Connection version DIN

Highest quality guaranteed.

The well-known, high NGK quality standards are also applied to NGK ignition coils: Each ignition coil is produced strictly according to OE specifications. The positioning and contacting of the components as well as the execution of solder joints and connections is based on the strict quality standard TS16949.

The vacuum casting process is used for bubble-free casting. Before delivery, each ignition coil in the range is measured mechanically and electrically using a laser, subjected to an installation test as well as long-term overtemperature tests and a temperature change test from -40 to +140 ° C.
In addition, the grinding pattern of the winding and the electromagnetic compatibility are precisely checked.

The ignition coils are very important for the life of a rotary engine.
Misfires from a cheap or damaged coil can and will ruin the rotary engine.

Customers who bought this product bought also the following products:

Idemitsu Racing Rotary Fuel Lube Premix 946ml

The Idemitsu Racing Rotary Fuel Lube Premix is added to the gasoline fuel.
The full synthetic Idemitsu Racing Rotary Fuel Lube Premix provides additional lubrication for apex and side seals, which extends the life of the seals and increases the efficiency of the rotary engine.

In addition, allow special additives adapted to rotary engines better sealing of the chambers, causing the engine runs noticeably quieter and thus more power can unfolded.
A formulation of synthetic base oils reduces all deposits and carbonization at the engine outlet.
Dispersive additives keep clean the injectors and reduce wear to a minimum. Proven mixing ratio ranges are 1:100 - 1:150 for racing and 1:200 - 1:300 for daily drive.
For an optimal mixing, fill in the premix oil before refueling.

For bulk buyers 1 carton consists of 12 bottles.

16,92 EUR
17,89 EUR per Liter

Idemitsu Rotary Engine Oil 10W30 946ml

With the precise synthetic base oil mix of PolyAlphaOlephins and PolyEsters, Idemitsu Rotary Engine Oils are able to minimize those deposits on your apex seals.

Allows for better sealing of the chamber, facilitating more power generation.

Extends the life of turbochargers by reducing bearing coking.

Specially developed additives facilitate even tooth load on the front stationary gear to allow for higher loads and higher RPM.

Premium anti-wear agents create a strong film between the main bearings and the eccentric shaft. reducing metal-to-metal contact and minimizing bearing wear.

Developed to reduce entrained gas generation. Entrained gases reduce the oils ability to prevent metal-on-metal contact. thereby increasing main bearing wear.

Includes Molybdenum as a friction modifier. This compound reacts with the metal surfaces to create a low-shear boundary. The low shear characteristic reduces friction, increasing efficiency and power output.

For bulk buyers 1 carton consists of 12 bottles.

20,92 EUR
22,11 EUR per Liter