RX-8 ECU Remapping Stage 0 Engine Protection All Years
RX-8 ECU Remapping Stage 0 Engine Protection 03-12
Optimizing after making an appointment or you can also send the ecu to us.
If the shipping option to us is only the ECUs from 2003-2008 of the series 1. Facelift and R3 only via appointment at our location.
Please click corresponding.
For all Mazda RX-8 Series 1, incl. Kuro, Series 2 R3 all years, 4Port 192HP(141kW) or 6Port 231HP(170kW).
The Stage 0 Engine Protection includes:
1. Elimination high revving the engine during cold start cranking.
2. Lowering the high idle speed rpm when the engine is cold.
3. Setting idle
4. Cold start limiter set to your wish rpm.
5. Increasing the oil injection amount.
6. Lowering the switch on temps cooling fan 1 & 2.
7. Elimination of dangerous lean running engine at part load all gears - The well known catalizer killer.
8. Adjustment of installed performance coils included.
NEW 9. ECO adjustment to approx. 4000 rpm for more efficiency and performance.
Elimination of DTCs included.
Time required for Stage 0 with eventually log drives and programming about 1 hour.
Product Safety Information
Responsible Person in the EU
Wankelshop
Ayinger Str. 1
85653 Aying, Germany
ask@wankelshop.com
Optimizing after making an appointment or you can also send the ecu to us.
If the shipping option to us is only the ECUs from 2003-2008 of the series 1. Facelift and R3 only via appointment at our location.
Please click corresponding.
For all Mazda RX-8 Series 1, incl. Kuro, Series 2 R3 all years, 4Port 192HP(141kW) or 6Port 231HP(170kW).
The Stage 0 Engine Protection includes:
1. Elimination high revving the engine during cold start cranking.
2. Lowering the high idle speed rpm when the engine is cold.
3. Setting idle
4. Cold start limiter set to your wish rpm.
5. Increasing the oil injection amount.
6. Lowering the switch on temps cooling fan 1 & 2.
7. Elimination of dangerous lean running engine at part load all gears - The well known catalizer killer.
8. Adjustment of installed performance coils included.
NEW 9. ECO adjustment to approx. 4000 rpm for more efficiency and performance.
Elimination of DTCs included.
Time required for Stage 0 with eventually log drives and programming about 1 hour.
Product Safety Information
Responsible Person in the EU
Wankelshop
Ayinger Str. 1
85653 Aying, Germany
ask@wankelshop.com