RX-8 ECU Remapping Stage 1 NA Performance 03-12
RX-8 ECU Remapping Stage 1 NA Performance Year 03-12
For all Mazda RX-8 Series 1 incl. Kuro and Series 2 of R3 Year 2003-2012 4Port 192HP, 231HP and 6Port and any kind of porting MSP engines.
The Stage 1 NA(Naturally Aspirated) Performance individual programming includes:
01. MAF calibration.
02. Fuel maps optimization.
03. Ignition maps optimization.
04. Elimination the high cold-start peak engine rpm during starting process.
05. Lowering the idle rpm when the engine is cold.
06. Setting idle rpm.
07. Cold start limiter set to desired rpm till 80 °C water temperature.
(Instead oem 5500 rpm / 20 ° C).
08. Optimizing and increasing the oil injection map.
09. Lowering the cut-in temps cooling fan 1 & 2.
10. Elimination of the dangerous engine lean run in the partial load range all gears - The famous catalyzer killer.
11. Adjustment map of installed performance coils included.
12. Elimination of inertia accelerator, similar accelerator Booster.
Elimination of DTCs included.
Tuning on your desired type of gasoline is possible, if this has been fueled in advance. (Super95, E10 or SuperPlus)
Required time for Stage 1 including log drives and individual programming is approximately 4-6 hours.
The optimization is possible in our shop with the vehicle by appointment.
No shipping is possible!
For all Mazda RX-8 Series 1 incl. Kuro and Series 2 of R3 Year 2003-2012 4Port 192HP, 231HP and 6Port and any kind of porting MSP engines.
The Stage 1 NA(Naturally Aspirated) Performance individual programming includes:
01. MAF calibration.
02. Fuel maps optimization.
03. Ignition maps optimization.
04. Elimination the high cold-start peak engine rpm during starting process.
05. Lowering the idle rpm when the engine is cold.
06. Setting idle rpm.
07. Cold start limiter set to desired rpm till 80 °C water temperature.
(Instead oem 5500 rpm / 20 ° C).
08. Optimizing and increasing the oil injection map.
09. Lowering the cut-in temps cooling fan 1 & 2.
10. Elimination of the dangerous engine lean run in the partial load range all gears - The famous catalyzer killer.
11. Adjustment map of installed performance coils included.
12. Elimination of inertia accelerator, similar accelerator Booster.
Elimination of DTCs included.
Tuning on your desired type of gasoline is possible, if this has been fueled in advance. (Super95, E10 or SuperPlus)
Required time for Stage 1 including log drives and individual programming is approximately 4-6 hours.
The optimization is possible in our shop with the vehicle by appointment.
No shipping is possible!