ATE TYP 200 RACING Brake Fluid (1000ml)
ATE TYP 200 RACING Brake Fluid (1000ml)
ATE TYP 200 RACING Brake Fluid (1000ml)

ATE TYP 200 RACING Brake Fluid (1000ml)

Product No.:
ATE-TYP-200
1-4 Business Days to DE 1-4 Business Days to DE (foreign countries vary)
19,77 EUR

incl. 19% tax excl. Shipping costs

Add to wish list
Ask about product
Description
ATE TYPE 200 RACING Brake fluid 1000ml

High-performance brake fluid

With its excellent wet boiling point, it has the highest safety reserves.

DOT 4
Boiling point at least: 280 ° C
Wet Boiling Point: 198 ° C

The ATE brake fluid type 200 is the successor to the popular ATE Super Blue Racing brake fluid.

Always brake fluid change in time, because brake fluid ages, ie, Binds water and after 3 years to 12% may contain water.


Content: 1000ml

Customers who bought this product bought also the following products:

DEI metal cable ties 30cm
DEI metal cable ties 30cm
1,99 EUR
D1 SPEC FENDER WASHER M6 SET
D1 SPEC FENDER WASHER M6 SET
6,95 EUR
DEI Heat Wrap Titanium 1400C 4.5m
DEI Heat Wrap Titanium 1400C 4.5m
30,26 EUR
6,72 EUR per Metre
ROTARY 13B1 NO PISTON AIR FRESHENER
ROTARY 13B1 NO PISTON AIR FRESHENER
2,49 EUR
Idemitsu Rotary Engine Oil 20W50
Idemitsu Rotary Engine Oil 20W50 946ml
Idemitsu Rotary Engine Oil 20W50
With the precise base oil mix of PolyAlphaOlephins and PolyEsters. Idemitsu Rotary Engine Oils are able to minimize those deposits on your apex seals. 

Allows for better sealing of the chamber. Facilitating more power generation. 

Extends the life of turbochargers by reducing bearing coking.

Specially developed additives facilitate even tooth load on the front stationary gear to allow for higher loads and higher RPM.

Premium anti-wear agents create a strong film between the main bearings and the eccentric shaft. reducing metal-to-metal contact and minimizing bearing wear.

Developed to reduce entrained gas generation.  Entrained gases reduce the oils ability to prevent metal-on-metal contact. thereby increasing main bearing wear.

Includes Molybdenum as a friction modifier.  This compound reacts with the metal surfaces to create a low-shear boundary.  The low shear characteristic reduces friction. Increasing efficiency and power output.





Do you feel that you aren’t getting the power you should be from your rotary engine?  Are you experiencing bearing wear under severe (or possibly under not-so-severe) operating conditions?  If so. you may be using the wrong engine oil.  Idemitsu Racing Rotary Engine

The Idemitsu 20W50 Oil can reduce or even eliminate some of the problems you may be having.  
As the developer of the engine oil for the winning 1991 LeMans Mazda 787B and a long time supplier of vital lubricants to Mazda. Idemitsu has intimate knowledge of the requirements of rotary engines. 
For bulk buyers 1 carton consists of 12 bottles.



 
21,92 EUR
23,17 EUR per Liter